The decoration of intravenous drug dispensing center is a very important place in the hospital. In order to ensure that the operation process is not disturbed, many hospitals will install the operating room in the operating room to ensure a good operating environment. But in order to ensure this, the hospital should keep the door of the operating room in the process of daily use. Let's see how to maintain it.
How to maintain the induction door?
1. When using the door of the induction operating room, pay attention not to let the heavy objects and sharp tools collide with and scratch the sensing door, so as to avoid the deformation of the induction door, the gap between the door blades becoming larger, and the damage of the surface protective layer, resulting in the decline of its performance.
2. If you want to maintain the sensitive door of the operating room, you need to do the cleaning work of the friendly door. Not only the door should be cleaned, but also the residual water on the surface of the door should be removed after cleaning to avoid the corrosion of the door and some parts by the residual water. In addition, keep the operation room clean near the sensitive door, timely accumulate dust and waste debris, and avoid the impact of the sensitive device on the sensitive door which leads to insensitivity.
3. In use, a large amount of dust will accumulate on the chassis of the operating room responsive door. In order to avoid the poor action of the door during the opening and closing action, the case shall be cleaned regularly and in case of power failure, so as to ensure the maintenance safety.
4. It is very important to coordinate the doors of the induction operating room between the components. Therefore, regular maintenance and inspection should be carried out during the guide rail and the ground wheel, so as to clean and lubricate them well and avoid the hidden dangers of the induction door.
It is very important to sense the door of the operating room. It can not only avoid the sterilization operation with too much air outside, but also facilitate the access of hospital personnel and avoid affecting the operation. Therefore, in the process of using, the sense will prepare the door of the operating room for maintenance, so as to ensure that the operation of the sense door can have better quality.
The above is a detailed introduction to the daily maintenance of the sensor door in the decoration of the intravenous drug distribution center. For more information, please click http://www.moptuan.com