What are the interior decorations for cleaning works?
The construction and decoration of dust-free workshop area and control area in purification project should be carried out according to the standards of purification industry. The interior decoration of purification project should be easy to clean and protect, and the appearance should be flat, and no granular substances should be dropped. According to the standard requirements of the cleaning engineering industry, interior decoration should generally satisfy several requirements.
The envelope structure and interior decoration materials of the project can be selected with outstanding air tightness, together with the materials with small deformation when the temperature and humidity change. The appearance of the wall and ceiling should be bright, flat, no dust, no dust, corrosion resistance, impact resistance, and easy to clean. In order to make the construction appearance of the purification project as little as possible ash, easy to clean, should be avoided or minimized in the construction of the structure concave and convex surface, wall and ground, wall and roof, wall and wall joints should not be made into a general right angle, should be made into radius greater than or equal to 50 mm rounded angle. The color of the wall coating should be harmonious, elegant and plain, so as to flicker the contaminants on the wall. Similarly, the ground should be flat, seamless, wear-resistant, corrosion-resistant, impact-resistant, non-accumulation of static electricity, easy to clean dust.
In order to avoid the particulate and microbial pollution in the skill sandwich, the wall and roof should be plastered (should be high-grade plastering). If you need to replace the high-efficiency filter in the skill sandwich, the wall in the sandwich, the ceiling should also be painted with a cover. The exterior decoration of the air supply channel, return air channel and return air ditch should be suitable for the whole air supply and return air system, and be easy to clean and disinfect.
Cleaning doors and windows should be flat and try not to leave window sills. The number of outer windows and the structure of doors and windows should be considered according to the pollution degree of outdoor air, the design temperature and humidity inside the outdoor surface, the pressure difference inside the outdoor surface, and the cleanliness of the room, so that the structure can seal the air and water vapor, so that the pollutants are not easily invaded from the outside, and can avoid the surface condensation inside the surface. In order to avoid cross-contamination in the clean area of the purification project, the cracks of the internal doors, windows and partitions between rooms with different cleanliness should be sealed. Doors and windows should be simple in shape, and no threshold should be set up for cleaning.
In order to ensure the cleanliness of the purification works, the clean area must be sealed by windows. There should be double windows between the air conditioning area and the non air conditioning area, at least one of which is a fixed window. In addition, the contact doors between different cleanliness levels should be sealed, flat and simple in shape, and the doors should be open to the direction of higher grade.
In summary, all of the above are provided by Shandong Jingzhiyuan Purification Engineering Co., Ltd. To learn more about the renovation of intensive care unit, please visit our website: http://www.moptuan.com. Thank you for your support!