It is best to assemble air cleaning systems from up and down to control the temperature and humidity of the room independently. The temperature in the medical area should be maintained at (24 + 1.5) degrees centigrade. Each single room air conditioning system should be controlled independently. The installation of sufficient inductive hand washing facilities and hand disinfection devices, a single bed of 1 sets, open sickbeds at least 2 beds per 1 sets.
1, the number of beds in ICU is generally set according to 3 to 5% of the total beds in the hospital. Each ICU management unit is 8 to 12 beds, and the bed usage rate is 65~75%.
2, location selection, examination and treatment of patients with convenient transport, regional, and consider the following factors: close to the main service object area, operation room, laboratory and Department of imaging, blood bank, can not be achieved in the transverse close, should consider the longitudinal "close to the upstairs downstairs"。
3, ICU open sickbeds per bed covers an area of 15~18M2; each ICU is equipped with a single room with an area of 18~25M2. The establishment of a positive pressure and negative pressure isolation ward in each ICU is usually equipped with a negative pressure isolation unit (1~2).
There should be relative independence between the medical area of the sickbed, the area of the medical auxiliary room, the disposal area of the waste and the auxiliary living area of the medical staff, so as to reduce mutual interference and control the infection.
The wonderful content of this article comes from the detailed content of the intensive care unit。 Please click on our official website: http://www。sdyhrs。com thank you for your arrival。