What are the common ways to purify operation room?
What are the common methods of operating room purification? Absorption is a common skill of operating room purification, which is commonly used by many hospitals. It requires a mass transfer from the gaseous phase through the interface to the liquid phase. The absorbed substance can be physically dissolved in the liquid and may react with the liquid. Desorption is a special case of the same operation. At the moment, the material is transferred from the liquid to the gas phase.
Most of the absorbers used for operation room purification operations are packed towers, plate towers or spray towers. Absorbers in these ways can be used interchangeably over a wide range of changes, but in a particular case, perhaps one way is more advantageous than the other.
Generally speaking, packed towers are suitable for small-scale equipment and corrosive liquids which are prone to full foam. They can also be used in situations with high liquid-gas ratio and low pressure. Plate tower oil is generally lighter, because it can often allow a larger air flow rate, so the required diameter of the tower is smaller. They are especially suitable for large scale equipment, clean and non foaming, non foaming liquids, and for low liquid velocity. Although porous panels are gaining acclaim and have many important economic advantages (even though they are less flexible to operate), blister panels may still be widely used in operating room cleaning.
In summary, all the above-mentioned Shandong Jingzhiyuan Purification Engineering Co., Ltd. provides, want to know more about operating room decoration knowledge, welcome to pay attention to our website: http://www.moptuan.com Thank you for your support!